Ethernet connection to the network Also verify the RF Link LED on the Slave CR SEB is on This indicates that the Slave CR SEB has linked to the Master CR SEB through the wireless connection The RF Link LED is on for the Master CR SEB when any one Slave CR SEB is linked If a DHCP or BOOTP server is being used the Slave CR SEB will be assigned an IP address immediately after linking with the Master If a DHCP or BOOTP server is not available the IP address of the Slave CR SEB mu
Ethernet connection to the network Also verify the RF Link LED on the Slave CR SEH is on This indicates that the Slave CR SEH has linked to the Master CR SEH through the wireless connection The RF Link LED is on for the Master CR SEH when any one Slave CR SEH is linked If a DHCP or BOOTP server is being used the Slave CR SEH will be assigned an IP address immediately after linking with the Master If a DHCP or BOOTP server is not available the IP address of the Slave CR SEH mu
CR SEB CR SEB X Wireless Ethernet Bridge CIRRONET 5375 Oakbrook Parkway Norcross Georgia 30093 www cirronet com 678 684 2000 Important Regulatory Information Cirronet Product FCC ID HSW 2410 IC 4492A 2410 Note This unit has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
CR SEHxX is on This indicates that the Slave CR SEHX has linked to the Master CR SEHX through the wireless connection The RF Link LED is on for the Master CR SEHX when any one Slave CR SEHxX is linked If a DHCP or BOOTP server is being used the Slave CR SEHX will be assigned an IP address immediately after linking with the Master If a DHCP or BOOTP server is not available the IP address of the Slave CR SEHX must be set manually Refer to Step 1b Once the Slave CR SEHxX is l
HN 2010 Repeater User s Guide CIRRONET 5375 Oakbrook Parkway Norcross Georgia 30093 www cirronet com 1 678 684 2000 Important Regulatory Information Cirronet Product FCC ID HSW 2410 Note This unit has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful a commercial environment This equipment generates uses and c
INSTRUCTION MANUAL Cirro Strata CS6 Mist Generator INTRODUCTION The Cirro Strata is a professional mist generator for producing sufficient airborne reflection particles to enable effect lighting to be seen It has been developed for applications such as Clubs Discos Film and TV location work Theatre Ballet and Concert Tours For very large studios and arenas consideration can be given to the larger Cirro MK3 model available especially for this type of work The Strata is t
INSTRUCTION MANUAL CIRRO MK 3 TYPE 2 MIST GENERATOR INTRODUCTION The Cirro MK 3 is a fully professional mist generator for producing sufficient airborne reflection particles to enable effect lighting to be seen It is equally at home in both the large arena film and TV studios The unit is totally self contained and all that is required for operation is a supply of mains power and sufficient oil in the tank The Cirro MK 3 has been developed from the well established Cirrus