ENGGS864 Microcomputer Interfacing Lab 2 Parallel Port Programming amp General Interfacing School of Engineering University of Guelph Fall 2012 Start Date Wednesday Week 4 Due Date No Report is Required 1 Objectives The purpose of this lab is to e Develop fundamental concepts associated with programming parallel ports available on the MC68HC12 micro controller e Design and construct a system which displays the 8 bit binary ASCII code of a pressed PC keybo
EM PLAB2 ts INSTRUCTIONS PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE IF YOU DO NOT UNDERSTAND THE INSTRUCTIONS OR DO NOT FEEL THAT YOU CAN FOLLOW THEM SAFELY CONTACT A QUALIFIED CONTRACTOR THE WARRANTY WILL BE HONOURED IF ACCOMPANIED BY AN ORIGINAL SALES RECEIPT AND ONLY IF THE INSTRUCTIONS HAVE BEEN FOLLOWED EXACTLY e The EM PLAB2 is designed to mount a panel onto a vertical wall Hardware for mounting to a wood stud is included For mounti
ECE4112 Lab 2 Lab2 Password Cracking Network Sniffing Man in the Middle attacks and Virtual Private Networks VPN Group Number Member Names Date Assigned January 24 2012 Date Due February 2 2012 Please read the entire lab and any extra materials carefully before starting Be sure to start early enough so that you will have time to complete the lab Answer ALL questions in the Answer Sheet and be sure you turn in ALL materials listed in the Turn in Checklist on or
Lab 2 Using UART EE 379 Embedded Systems and Applications Electrical Engineering Department University at Buffalo Last update Cristinel Ababei January 2013 1 Objective The objective of this lab is to utilize the Universal Asynchronous Receiver Transmitter UART to connect the MCB1700 board to the host computer Also we introduce the concept of interrupts briefly In the example project we send characters to the microcontroller unit MCU of the board by pressing keys on t