ScanGauge By LinearLogic s Telematica cay ees Www sCangauge gT 11 H ScanGaugell
ine SCanGauge by Y neacLogic INSTALLATION AND OPERATION www scangauge com www linear logic com WARNING Use of the ScanGaugell while driving could lead to an accident and serious injuries The primary attention of the driver should always be on safe driving As with any gauge or other instrumentation system in a motor vehicle the information should be observed as part of a normal sequence of observations performed in the operation of the vehicle Changes to the s
By Linear Logic www ScanGauge com Gauge 1 Locate the Diagnostic Connector The connector is generally located under the dash at the fire wall on the driver side and is usually protected by a plastic cover To remove the protective cover you must push the cover while turning counter clockwise then pull to remove it Typical J1939 J1708 protective cover 9 pin connects to vehicles Determine Plug Type 6 pin connects to vehicles that
TM Gauge www ScanGauge com Quick Start Guide Plugs into the diagnostic connector already built into all 1996 or newer cars and light trucks 1 Quick Start Installation e Locate your vehicle s OBDII connector Generally located under the dash on the left or right side of the steering column OBDII Connector e Choose a suitable location for the ScanGaugell and Mount your ScanGaugell using the supplied velcro strips e Route the cable from the ScanGau