Operation ACTIVATING MIST CYCLE ACTIVATING WITH REMOTE CONTROL 1 Before activating Mist Cycle make sure no people pets or food items are in the mist area 2 Press green Power Mist Button on back of Mister once to turn unit ON System Power light on Battery Pack will flash indicating unit is ON NOTE Mister will automatically power OFF after 10 minutes of inactivity 3 Press and HOLD for one second Remote Control ON button 4 Mister begins a 12 second audible countdo
Operation POSITIONING THE MISTER Proper placement of the ALLCLEAR Cordless Mosquito Mister PRO is important for optimal insect control 1 Determine area to be protected 2 Roll Mister into desired coverage area and establish direction of prevailing wind 3 Position Mister according to wind conditions shown here EXAMPLE Treating a Patio Area Determine prevailing wind Depending on wind direction place Mister on either side of in the center of or a few feet
Operation IMPORTANT TIPS ACTIVATING MIST CYCLE The Start Mist button on the Control Panel turns Mist Cycle on and off Mister Power Switch must be turned to ON position before Mist Cycle can be activated located behind the locked Tank Access Door Mist Cycle will not activate if Battery Charging Adapter is plugged into Mister Avoid using the Mister during high winds gt 10 mph heavy rainfall fog or when outside air temperatures fall below 50