Bia FT GOLDILUX LIGHT METERS USER MANUAL GAL 2L GAL 2H GAL 3L with GALP probes GENERAL DESCRIPTION EXTERNAL FEATURES AND CONTROLS OPERATING INSTRUCTIONS MAINTENANCE AND PRECAUTIONS CALIBRATION SPECIFICATIONS WARRANTY INFORMATION 2 Switch on the instrument and check its zero with the cap firmly on the detector Should it be necessary to adjust the meter reading to zero e g for calibration purposes adjust it via the potentiometer accessible
GOLDILUX M P SERIES ULTRAVIOLET PROBES MODELS GAP 1 GBP 1 GCP 1 USER MANUAL GENERAL DESCRIPTION OPRATING INSTRUCTIONS MAINTENANCE AND PRECAUTIONS CALIBRATION SPECIFICATIONS WARRANTY INFORMATION with the A D inputs shortened are taken at regular intervals by the micro processor and subtracted from subsequent probe readings In the other ZERO mode Rel the probe reading present when the key is pressed is subtracted from subsequent probe readings Whene
PROBES FOR BLUE LIGHT MEASUREMENT The GOLDILUX Bilirubin Phototherapy Meter GBIL 1L has been designed for the accurate measurement of the amount of therapeutically effective blue light used for the treatment of hyperbilirubinemia or neo natal jaundice The probe detector matches the photooxidation response of Bilirubin in the blood of jaundiced neonates This response has been shown to be most pronounced in a wavelength region from 400 to 500 nm with a maximum at 450 nm For
GOLDILUX M P SERIES COSINE CORRECTED ILLUMINANCE PROBES USER MANUAL The main probe parameters are displayed in a series of consecutive screens on the LCD display whenever the probe ID key is pressed In case of a dose measurement press the NORMAL DOSE key on the display unit and toggle through the available choices of integration time by using the UP and DOWN keys Then press the START STOP key on the display unit to start the dose integration over the selected tim
e GOLDILUX ULTRAVIOLET METERS USER MANUAL GUVA 1L 1H GUVB 1L 1H GUVC 1L 1H GUV OL with all GUVAP GUVBP and GUVCP probes GENERAL DESCRIPTION EXTERNAL FEATURES AND CONTROLS OPERATING INSTRUCTIONS MAINTENANCE AND PRECAUTIONS CALIBRATION SPECIFICATIONS OPERATING INSTRUCTIONS 1 Take the instrument from its storage place and plug in the external probe if used mounting or placing itin the position where measurements are to be made 2 Switch on the inst