Microsoft 1062 Microsoft Wireless Laser Mouse 8000 User Manual Manual

Microsoft Corporation Microsoft Wireless Laser Mouse 8000 Manual


10206   Part No. X00-00000MMicrosoft Product GuideRead this guide for important safety and health information and the terms of the Warranty that cover the Microsoft® device that you have purchased.Warning  Failure to properly set up, use, and care for this product can increase the risk of serious injury or death, or damage to the device or devices. Read this guide and keep all printed guides for future reference. For replacement guides, go to or refer to the Microsoft Help and Support section for contact information.This document includes important information about many Microsoft products. Refer to sections that apply to the features of your device:Important Safety Information   AC-Powered Devices   Battery-Powered Devices   Wireless Devices   Keyboard and Mouse Devices   Devices with Laser Pointers   All Devices Healthy Computing Guide Laser and LED Specications Regulatory Information Radio Frequency Technical Specications Radio and TV Interference Regulations Disposal of Waste Electrical and Electronic Equipment Patent Information Microsoft Help and Support Limited WarrantyThis symbol identies safety and health messages in this Product Guide and other product manuals.Important Safety InformationAC-Powered DevicesThese precautions apply to all products that plug into a standard wall power outlet.Failure to take the following precautions can result in serious injury or death from electric shock or re or in damage to the device.
2To select an appropriate power source for your device:●  Use only the power supply unit and AC power cord that came with your device or that you received from an authorized repair center.●  Conrm that your electrical outlet provides the type of power indicated on the power supply unit (in terms of voltage [V] and frequency [Hz]). If you are not sure of the type of power supplied to your home, consult a qualied electrician.●  Do not use non-standard power sources, such as generators or inverters, even if the voltage and frequency appear acceptable. Only use AC power provided by a standard wall outlet.●  Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle. Conrm that they are rated to handle the total current (in amps [A]) drawn by the device (indicated on the power supply unit) and any other devices that are on the same circuit.To avoid damaging the power cords and power supply:●  Protect the power cords from being walked on.●  Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet, the power supply unit, and the device.●  Do not jerk, knot, sharply bend, or otherwise abuse the power cords.●  Do not expose the power cords to sources of heat.●  Keep children and pets away from the power cords. Do not allow them to bite or chew on them.●  When disconnecting the power cords, pull on the plug—do not pull on the cord.If a power cord or power supply becomes damaged in any way, stop using it immediately. Unplug your device during lightning storms or when unused for long periods of time.For devices with an AC power cord that connects to the power supply, always connect the power cord according to the following instructions:1  Plug the AC power cord into the power supply until it stops.2  Plug the other end of the AC power cord into the wall outlet.Battery-Powered DevicesThese precautions apply to all products that use rechargeable or disposable batteries.Improper use of batteries may result in battery uid leakage, overheating, or explosion. Released battery uid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed.To reduce the risk of injury:●  Keep batteries out of reach of children.●  Do not heat, open, puncture, mutilate, or dispose of batteries in re.●  Do not mix new and old batteries or batteries of different types (for example, carbon-zinc and alkaline batteries).●  Do not allow metal objects to touch the battery terminals on the device; they can become hot and cause burns.
3●  Remove the batteries if they are worn out or before storing your device for an extended period of time.●  Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Disposal Regulations.●  If a battery leaks, remove all batteries, taking care to keep the leaked uid from touching your skin or clothes. If uid from the battery comes into contact with skin or clothes, ush skin with water immediately. Before inserting new batteries, thoroughly clean the battery compartment with a damp paper towel, or follow the battery manufacturer’s recommendations for cleanup.Disposable (non-rechargeable) batteries only:●  Caution  Risk of explosion if battery is replaced by an incorrect type. Use and replace only with correct size and type (alkaline, zinc-carbon, or zinc-chloride) of batteries.Rechargeable batteries only:●  Caution  Risk of explosion if battery is replaced by an incorrect type. Use and replace only with the same type and rating as the batteries provided.●  Charge only with the recharger provided with the product.Wireless DevicesBefore boarding any aircraft or packing a wireless device in luggage that will be checked, remove the batteries from the wireless device or turn the wireless device off (if it has an on/off switch). Wireless devices can transmit radio frequency (RF) energy, much like a cellular telephone, whenever batteries are installed and the wireless device is turned on (if it has an on/off switch).Keyboard and Mouse DevicesHealth WarningUse of a keyboard or mouse may be linked to serious injuries or disorders.When using a computer, as with many activities, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. However, if you experience symptoms such as persistent or recurring discomfort, pain, throbbing, aching, tingling, numbness, burning sensation, or stiffness, DO NOT IGNORE THESE WARNING SIGNS. PROMPTLY SEE A QUALIFIED HEALTH PROFESSIONAL, even if symptoms occur when you are not working at your computer. Symptoms like these can be associated with painful and sometimes permanently disabling injuries or disorders of the nerves, muscles, tendons, or other parts of the body. These musculoskeletal disorders (MSDs) include carpal tunnel syndrome, tendonitis, tenosynovitis, and other conditions.While researchers are not yet able to answer many questions about MSDs, there is general agreement that many factors may be linked to their occurrence, including: overall health, stress and how one copes with it, medical and physical conditions, and how a person positions and uses his or her body during work and other activities (including use of a keyboard or mouse). The amount of time a person performs an activity may also be a factor.
4Some guidelines that may help you work more comfortably with your computer and possibly reduce your risk of experiencing an MSD can be found in the “Healthy Computing Guide” installed with this device’s software. If this device did not come with software, see the “Healthy Computing Guide” section of this manual. You can also access the “Healthy Computing Guide” at or (in the United States only) by calling (800) 360-7561 to request a CD at no charge.If you have questions about how your own lifestyle, activities, or medical, or physical condition may be related to MSDs, see a qualied health professional.Devices with Laser PointersCaution  Use of controls or adjustments, or performance of procedures other than those specied herein may result in hazardous radiation exposure.●  Do not stare into beam.●  Do not shine a laser pointer at anyone. Laser pointers are designed to illuminate inanimate objects.●  Do not allow minors to use a pointer unsupervised. Laser pointers are not toys.●  Do not point a laser pointer at a mirror-like (reective) surface. A reected beam can act like a direct beam on the eye.●  Do not disassemble the device.●  Do not use the device outside of its specied operating temperature range +41ºF (+5ºC) to +95ºF (+35ºC). If the device is exposed to an environment outside of its prescribed operation, turn off the device and allow the temperature to stabilize within the specied operating range before using the device.All DevicesDo Not Attempt RepairsDo not attempt to take apart, open, service, or modify the hardware device or power supply. Doing so could present the risk of electric shock or other hazard. Any evidence of any attempt to open and/or modify the device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.
5Healthy Computing GuideIntroductionThis guide is designed to help you be more comfortable and productive while using your computer. It may also help you reduce your risk of experiencing painful and disabling injuries or disorders described in the Health Warning earlier in this manual.It only takes a moment to read, but the benets can be lasting.For information about arranging your workstation and developing habits that may help to reduce your risk of experiencing an MSD, read this “Healthy Computing Guide.” Because there are a variety of factors that may contribute to MSDs, this guide cannot provide everything you need to know to prevent an MSD or reduce your risk of experiencing one. For some people, following the suggestions may reduce their risk of experiencing an MSD. For others, it may not. However, many people experience greater comfort and productivity when following these suggestions. Keep in mind that this guide is not a substitute for the advice of a qualied health professional or an employer health policy or program. If you have questions about how your own lifestyle, activities, or medical or physical condition may be related to MSDs, see a qualied health professional.Position YourselfWhether you are working or playing, it is important to avoid awkward postures and position your body comfortably. Not only can this improve your overall productivity, it may help you avoid musculoskeletal disorders (MSDs). Keep in mind that changing your posture during extended tasks may also help you avoid discomfort and fatigue.When working or playing at the computer, adapt your surroundings and arrange your computing equipment to promote a comfortable and relaxed body posture. Setting up your workstation to avoid discomfort depends on your unique body size and work environment. However, the following suggestions may help to provide you with a more comfortable environment.To support your back, try the following:●  Use a chair that supports your lower back (see detail 1).●  Adjust your work surface and chair height to assume a comfortable and natural body posture (see detail 2).To promote comfortable leg postures, try the following:●  Clear away items from beneath your desk to allow comfortable leg positioning and movement.●  Use a footrest if your feet do not rest comfortably on the oor.
6To minimize reaching and to promote comfortable shoulder and arm postures, try the following:●  Place your keyboard and mouse or trackball at the same height; these should be at about elbow level. Your upper arms should fall relaxed at your sides (see detail 3).●  When typing, center your keyboard in front of you with your mouse or trackball located close to it (see detail  4).●  Place frequently used items comfortably within arm’s reach (see detail 5).To promote proper wrist and nger postures, try the following:●  Keep your wrists straight while typing and while using a mouse or trackball. Avoid bending your wrists up, down, or to the sides. If your keyboard has legs, extend them if this helps you maintain a comfortable and straight wrist position.●  Type with your hands and wrists oating above the keyboard, so that you can use your whole arm to reach for distant keys instead of stretching your ngers.To minimize neck bending and twisting, try the following:●  Position the top of the screen near eye level (see detail 6).  Bifocal wearers may need to lower the screen or talk to a qualied  health professional about glasses customized for computer work.●  Center your monitor in front of you. If you refer to your documents more frequently than your monitor, consider placing your documents directly in front of you and the monitor slightly to the side.●  Consider using a document holder to position your documents near eye level.To minimize eye strain, try the following:●  Position your monitor about an arm’s length away from you when seated comfortably in front of it.●  Avoid glare by placing your monitor away from light sources that produce glare, or use window blinds to control light levels.●  Remember to clean your screen. If you wear glasses, clean them also.●  Adjust your monitor’s brightness and contrast.●  Adjust on-screen font sizes to make viewing more comfortable for you, if your computer program has this feature.
7Go LightlyPhysical forces continuously interact with our bodies. We may think that only high-impact forces, such as car crashes, are likely to injure our bodies. However, low-impact forces may also result in injuries, discomfort, and fatigue if they are repeated or experienced over long periods of time.Some types of low-impact forces include:Dynamic force: A force that you exert through movement, such as pressing the keys while typing or clicking the mouse buttons.Static force: A force that you maintain for a period of time, such as holding your mouse or cradling the phone.Contact force: A force that occurs when you rest on an edge or hard surface, such as resting your wrists on the edge of your desk.To reduce the effects of low-impact forces on your body, try the following:●  Type with a light touch, keeping your hands and ngers relaxed, because it takes little effort to use keyboard keys.●  Use a light touch when clicking a mouse button or when using a joystick or other gaming controller.●  Hold the mouse with a relaxed hand and do not grip the mouse tightly.●  Avoid resting your palms or wrists on any type of surface while typing (see detail 7). The palm rest, if provided, should only be used during breaks from typing.●  Relax your arms and hands when you are not typing or using your mouse. Do not rest your arms and hands on edges, such as the edge of your desk.●  Adjust your chair so the seat does not press into the back of your knees (see detail  8).Take BreaksTaking breaks can help your body recover from any activity and may help you avoid MSDs. The length and frequency of breaks that are right for you depend on the type of work you are doing. Stopping the activity and relaxing is one way to take a break, but there are other ways, also. For example, just changing tasks—perhaps from sitting while typing to standing while talking on the phone—can help some muscles relax while others remain productive.To vary your daily activities and to work productively, try the following:●  Plan your work and play so that you are not doing the same thing for extended periods of time (such as performing the same activity or using the same part of your body).●  Use different input devices, such as your mouse and keyboard, to accomplish the same task. For example, to perform a scrolling task, you can use the wheel on the mouse and the arrow keys on the keyboard.
8●  Work more efciently by using software and hardware features to reduce your effort and increase your productivity. For example, you can press the Windows logo key to open the Microsoft Windows® Start menu.●  Learn about software and hardware features by reading the information that accompanied these products. For example, if you frequently highlight text, use the mouse ClickLock feature.Be HealthyA healthy lifestyle can help you perform and enjoy your everyday activities, including the time spent at your computer. Also, learning more about your health is an important step in staying comfortable and productive while using your computer.To help maintain good health, try the following:●  Eat a balanced diet and get adequate rest.●  Exercise for overall tness and to improve the strength and exibility of your body. Consult a qualied health professional to help you choose the stretches and exercises that are right for you.●  Learn to manage stress. One way to reduce stress at work is to plan your work area and schedule so that noise and distractions are kept to a minimum.●  See a qualied health professional if you have questions about how your medical and physical conditions may be related to MSDs. While researchers are not yet able to answer many questions about MSDs, there is general agreement that many factors may be linked to their occurrence, including previous injuries, diabetes, hormonal changes (such as pregnancy), and rheumatoid arthritis.ConclusionLearning more about working comfortably and productively, as well as your overall health, are important ways to help you enjoy your computing experience.Laser and LED SpecicationsCaution  Use of controls or adjustments, or performance of procedures other than those specied herein may result in hazardous radiation exposure.Laser DevicesThis device complies with International Standard IEC 60825-1:2001-08 for a Class 1 and Class 2 laser product. This device also complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001.Class 1 Laser Devices Beam description: Collimated (parallel) beam of infrared light (invisible to the user) Laser power output: < 716 microwatts (at 832 nanometers) to 834 microwatts (at 865 nanometers) Emitted laser wavelength: nominal: 850 nanometers, range: (832 – 865 nanometers)CLASS 1LASER PRODUCTIEC 60825-1:2001-08
9A Class 1 laser product is safe under reasonably foreseeable conditions of operation as described by IEC 60825-1 and 21 CFR 1040.10. However, it is recommended that you not direct the laser beam (which is emitted from the bottom of the device) at anyone’s eyes. Class 2 Laser DevicesBeam description: Collimated (parallel) beam of light Laser power output: < 1 milliwatt Emitted laser wavelength: 630 – 670 nanometersThis optical device has no serviceable parts. The Class 2 laser beam is emitted from the front of the device.Optical (LED) DevicesThis product has been evaluated to comply with International Standard IEC 60825-1:1993/A2:2001This product uses LEDs that are inherently Class 1.Regulatory InformationTested to comply with FCC (U.S. Federal Communications Commission) Standards. For home or ofce use. Not intended for use in machinery, medical, or industrial applications. Any changes or modications not expressly approved by Microsoft could void the user’s authority to operate this device. This product is for use with NRTL-Listed (UL, CSA, ETL, etc.), and/or IEC/EN 60950 compliant (CE marked) Information Technology equipment. No serviceable parts included.This device is rated as a commercial product for operation at +41ºF (+5ºC) to +95ºF (+35ºC).This Class B digital apparatus complies with Part 15 of the U.S. Federal Communications Commission (FCC) rules, Canadian ICES-003, RSS-Gen, RSS-210, and RSS-310. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The term “IC:” before the certication/registration number only signies that the Industry Canada technical specications were met.Cet appareil numérique de la classe B est conforme aux normes NMB-003, CNR-Gen, CNR-210 et CNR-310 du Canada. Son fonctionnement est assujetti aux deux conditions suivantes : (1) Cet appareil ne peut pas provoquer d’interférences nuisibles et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant entraîner un fonctionnement non désiré.L’expression « IC : » avant le numéro d’homologation/enregistrement signie seulement que les spécications techniques édictées par Industrie Canada ont été respectées.Class 1 LED product
10Radio Frequency Technical SpecicationsRadio frequency (RF) output power: < 54 dBµV/m at 3 m Keyboard with two channels – RF frequencies: 27.095 MHz (channel 1), 27.195 MHz (channel 2) Keyboard with a single channel – RF frequency: 27.195 MHz or 27.095 MHz Mouse with two channels – RF frequencies: 27.045 MHz (channel 1), 27.145 MHz (channel 2) Mouse with a single channel – RF frequency: 27.145 MHz or 27.045 MHzRadio and TV Interference RegulationsThe Microsoft hardware device(s) can radiate RF energy. If not installed and used in strict accordance with the instructions given in the printed documentation and/or on-screen help les, the device may cause harmful interference with other radio-communications devices (for example AM/FM radios, televisions, baby monitors, cordless phones, etc). There is, however, no guarantee that RF interference will not occur in a particular installation.To determine if your hardware device is causing interference to other radio-communications devices, disconnect the device from your computer or remove the device’s batteries (for a battery operated device). If the interference stops, it was probably caused by the device. If the interference continues after you disconnect the hardware device or remove the batteries, turn the computer off and then on again. If the interference stopped when the computer was off, check to see if one of the input/output (I/O) devices or one of the computer’s internal accessory boards is causing the problem. Disconnect the I/O devices one at a time and see if the interference stops.If this hardware device does cause interference, try the following measures to correct it:●  Relocate the antenna of the other radio-communications device (for example AM/FM radios, televisions, baby monitors, cordless phones, etc.) until the interference stops.●  Move the hardware device farther away from the radio or TV, or move it to one side or the other of the radio or TV.●  Plug the computer into a different power outlet so that the hardware device and radio or TV are on different circuits controlled by different circuit breakers or fuses.●  If necessary, ask your computer dealer or an experienced radio-TV technician for more suggestions. For more information about interference issues, go to the FCC Web site at: You can also call the FCC at 888-CALL FCC to request Interference and Telephone Interference fact sheets.For Bluetooth and 2.4 GHz devices only: To comply with FCC RF exposure requirements, the following operating congurations must be satised: the antenna has been installed by the manufacturer and no changes can be made.Microsoft Corporation; One Microsoft Way; Redmond, WA 98052-6399; U.S.A. United States: (800) 426-9400 Canada: (800) 933-4750
11Disposal of Waste Electrical and Electronic Equipment in the European Union and Other Countries/Regions with Separate Collection SystemsThis symbol on the product or its packaging means that this product must not be disposed of with your household waste. Instead, it is your responsibility to hand this over to an applicable collection point for the recycling of electrical and electronic equipment. This separate collection and recycling will help to conserve natural resources and prevent potential negative consequences for human health and the environment, which inappropriate disposal could cause due to the possible presence of hazardous substances in electrical and electronic equipment. For more information about where to drop off your electrical and electronic waste, please contact your local city/municipality ofce, your household waste disposal service, or the shop where you purchased this product. Contact for additional information on disposal of waste electrical and electronic equipment (WEEE).Patent InformationUnited States and/or international patents pending.Microsoft Help and SupportIf you have a question about your Microsoft hardware product, do the following:●  Check the system requirements for your product (located on the packaging) to make sure your system is compatible.●  Read through all printed documentation.●  For additional product information, go to the Microsoft Hardware Web site at●  For up-to-date help about using or troubleshooting your device, go to the Microsoft Help and Support Web site at●  See the customer support options in this section to nd the appropriate support option.Customer Support OptionsProduct Name:  Microsoft Hardware DevicesOEM Distributed:  If this product came with a new computer or device, the hardware manufacturer provides technical support. Please contact your manufacturer directly for support.Self-Help Support:  Search our Knowledge Base, watch videos for solving common problems, and download available updates by visiting and E-mail:  Chat immediately, or send an e-mail message to a Microsoft Support Professional by visiting Note that e-mail response may be delayed by several hours.
12Phone Support:  In the United States, call (866) 833-7088 In Canada, call (800) 876-8533 For all other regions, see the “International Technical Support Numbers”  later in this section.TTY Users:  In the United States, call (800) 892-5234  In Canada, call (866) 857-9850 For all other regions, see the “International Technical Support Numbers”  later in this documentation.Conditions:  Microsoft support services are subject to then-current prices, terms, and conditions, which are subject to change without notice. Toll charges may apply to all non-toll-free numbers listed.Note  For regional support policy details and more, go to and select your country or region from the list. If there is no Microsoft subsidiary ofce in your country or region, please contact the establishment from which you obtained your Microsoft product.International Technical Support Numbers (partial list only)ArgentinaAtención al Cliente, Activación de producto y Soporte Técnico: 0-800-999-4617 Soporte Técnico (Toll): (54) (11) 4316-4664AustraliaTechnical Support Phone: 13 20 58 Technical Support Fax: (61) (2) 9023 5021BoliviaAtención al Cliente (Toll Free): 0800-2029 Atención al Cliente, Activación de producto y Soporte Técnico: 800-100-359BrasilAtendimento Microsoft: 0800-888-4081CaribeTeléfono (Toll): (787) 268-8528 Fax (Toll): (787) 273-3636 Soporte Técnico (Toll Free): 1-877-672-3842 Correo Electrónico para soporte técnico: Centro de Servicios (Toll Free): (800) 297-5982 para códigos de áreas 787 & 809 solamente, 506-298-2000 (para otras áreas) Correo Electrónico para Atención a Usuarios: msccatus@microsoft.comCentroaméricaSoporte Técnico (Toll): (506) 298-2020 Correo Electrónico para soporte técnico: Customer Service/Centro de Servicios (Toll): (506) 298-2000 Customer Service E-mail/Correo Electrónico para Atención a Usuarios: msccatus@microsoft.comChileTeléfono (Toll Free): 800-330-6000ChinaTechnical Support Phone: 86-21-33024688 Technical Support (Toll Free): 800-820-3800ColombiaTeléfono (Toll): (571) 524-0404 Para llamadas desde fuera de Bogotá (Toll Free): 9800-5-10595, 9800-9-10595 Fax (Toll): (571) 524- 0405EcuadorAtención al Cliente, Activación de producto y Soporte Técnico: 1-800-258-025 PBX (Toll): (593) (2) 263-820 Fax (Toll): (593) (2) 262-894
13France0 825 827 829 (Numéro indigo : 0,15 € TTC/min)GermanyTelefonischer technischer Support: Support ohne zusätzliche Kosten: 0180 5 67 22 55 (0,12 €/min aus dem dt. Festnetz) Kostenpichtiger Support: 0180 5 67 23 30 (0,12 €/min aus dem dt. Festnetz)Hong Kong SARTechnical Support Phone (Toll): (852) 23889600 Fax: (852) 29671679JapanMicrosoft Security Support: TEL (Toll Free): 0120-69-0196 FAX: (81) (3) 5388-8253KoreaSecurity Support (Toll): 822-3468-7200 FAX: 822- 531-4600Latin American CountrieséxicoAtención a clientes y Soporte Técnico: 01-800-527-2000 Aplicaciones y Sistemas Operativos de Escritorio (Toll): (52) (5) 267-2199 Herramientas de Desarrollo y Sistemas Avanzados (Toll): (52) (5) 267-2190 Atención a Clientes (Toll): (52) (5) 267-2191 Atención a Distribuidores (Toll): (52) (5) 267-2110 Fax (Toll): (52) (5) 267-2119New ZealandTechnical Support Phone: 0800-444-335PanamáAtención al Cliente, Activación de producto y Soporte Técnico: 1-800-507-1885 Correo Electrónico para soporte técnico: Centro de Servicios (Toll Free): (800) 506-0001 Correo Electrónico para Atención a Usuarios: msccatus@microsoft.comParaguayMicrosoft Paraguay Atención al Cliente, Activación de producto y Soporte Técnico: 9-800-542-0004PerúAtención al Cliente, Activación de producto y Soporte Técnico: 0-800-51-900 InfoEmpresa (Toll): (511) 215-5006 Información sobre Eventos (Toll): (511) 215-5010 Fax (Toll): (511) 215-5004Puerto RicoAtención al Cliente, Activación de producto y Soporte Técnico: (866) 584-6059 Correo Electrónico para soporte técnico: Centro de Servicios (Toll Free): (800) 297-5982 para códigos de áreas 787 & 809 solamente Correo Electrónico para Atención a Usuarios: msccatus@microsoft.comSouth AfricaTechnical Support Phone: 0860225567 (inside South Africa) (Shared call) International Support Phone: +27 11 361 7000 Technical Support Fax: (27) (11) 361-8866SpainSoporte Técnico (para Espana): 902 197 198 (fuera de Espana) + 34 91 270 24 00SwedenPersonal Support: +46 8 752 09 29 Professional Support: +46 8 751 09 80TaiwanTechnical Support Phone: Technical Support (Toll): 886-2-6635-9111 FAX: 886-2-6626-8877ThailandTechnical Support Phone (Toll): 662 6320860-3TurkeyTechnical Support Phone (Toll): +90 212 33 66 999United KingdomTechnical Support Phone: 0870 60 10 100 (National Rate)
14UruguayAtención al Cliente, Activación de producto y Soporte Técnico: 000-4054-349 Atención a Canal (Toll): (598) 2-916-4446VenezuelaAtención al Cliente, Activación de producto y Soporte Técnico: 0-800-642-767-638 Fax (Toll): (582) 276-0600 Soporte Técnico (Toll): (58)(212)0500-MICROSOFT (0500-6427676) Correo Electrónico para Atención al Cliente: Correo Electrónico para Soporte Técnico: Atención al Canal (Toll): (58)(212)0800-MSCANAL (0800-6722625) Correo Electrónico para Atención al Canal: Registro de Eventos (Toll): (58)(212)0500-MSEVENTOS (0500-6738368)Limited WarrantyIMPORTANT—PLEASE READ THIS LIMITED WARRANTY CAREFULLY TO UNDERSTAND YOUR RIGHTS AND OBLIGATIONS! The term “Hardware Device” means the Microsoft hardware product. The term “You” means either an individual or a single legal entity who will be referred to in this Limited Warranty as “You” and “Your”.A. WARRANTIES.1. Express Warranty. Subject to the terms and conditions of this Limited Warranty and in lieu of any other (if any) express warranties, Microsoft warrants that under normal use and service, on the date of acquisition as shown on Your receipt or similar proof of payment and for the next i) 90 days for the SOFTWARE and ii) period of time stated below for the applicable Hardware Device (hereafter each dened as the “Warranty Period”), that the SOFTWARE and Hardware Device will substantially conform with the accompanying Microsoft packaging and documentation. As to any defects discovered after the Warranty Period, there is no warranty or condition of any kind.Warranty Period:For all Microsoft keyboard and mouse desktop sets: Three (3) yearsFor all Microsoft keyboard devices: Three (3) yearsFor Microsoft mouse devices:Comfort Optical Mouse 3000; Wireless Optical Mouse 1000; Basic Mouse; Basic Notebook Optical Mouse; Compact Optical Mouse; Mobile Optical Mouse; Notebook Optical Mouse; Optical Mouse by Starck; Standard Wireless Optical Mouse; Wheel Mouse; Wheel Mouse Optical: Two (2) yearsWireless Laser Mouse 8000; Wireless Notebook Presenter Mouse 8000; Natural™ Wireless Laser Mouse 6000; Notebook Laser Mouse 6000 for Bluetooth®; Laser Mouse 6000; Wireless Notebook Laser Mouse 6000; Wireless Laser Mouse 5000; Wireless Notebook Optical Mouse 5000; Wireless Notebook Optical Mouse 4000; Wireless Optical Mouse 3000; Wireless Notebook Optical Mouse 3000; Wireless Optical Mouse 2000; Comfort Optical Mouse 1000; Notebook Optical Mouse 3000; Basic Optical Mouse; Cordless Wheel Mouse; IntelliMouse; IntelliMouse Explorer; IntelliMouse Trackball; Mouse 2.0; Optical Mouse; Trackball Optical; Wireless Notebook Optical Mouse; Wireless Optical Mouse; Wireless Wheel Mouse: Three (3) yearsWireless Laser Mouse 6000; Wireless Optical Mouse 5000; IntelliMouse Optical; IntelliMouse Pro; IntelliMouse with IntelliEye;
15Trackball Explorer; Wireless IntelliMouse Explorer; IntelliMouse Explorer for Bluetooth; Wireless IntelliMouse Explorer with Fingerprint Reader: Five (5) yearsMicrosoft Fingerprint Reader: Three (3) yearsMicrosoft Presenter 3000: Three (3) yearsMicrosoft webcam products: Three (3) yearsThis Limited Warranty does not cover, and no warranty of any kind is provided with respect to any subjective or aesthetic aspects of the Hardware Device or SOFTWARE. The express warranty stated above is the only express warranty made to You and is provided in lieu of all other express or implied warranties and conditions (except for any non-disclaimable implied warranties that exist), including any created by any other documentation or packaging. No information or suggestions (oral or in a record) given by Microsoft, its agents, afliates or suppliers or its or their employees or agents, shall create a warranty or condition or expand the scope of this Limited Warranty. The “Governing Law; Exclusive Forum” provision of Part 2 of the Agreement applies to this Limited Warranty and is incorporated herein by this reference.2. Limitation on Duration of Implied Warranties. If You are a consumer, You may also have an implied warranty and/or condition under the laws of some jurisdictions, which is hereby limited to the duration of the Warranty Period. Some jurisdictions do not allow limitations on how long an implied warranty or condition lasts, so the foregoing limitation may not apply to You.B. EXCLUSIVE REMEDY. Subject to applicable law and the following, and provided that You return the SOFTWARE and Hardware Device to Your place of acquisition (or, if that place will not accept the return, to Microsoft) with a copy of Your receipt or other bona de proof of payment during the Warranty Period, Microsoft will, at its option and as Your exclusive remedy for breach of this Limited Warranty and any implied warranties:repair or replace all or part of the defective SOFTWARE or the defective Hardware Device; ormake payment to You for the allowable damages that You incurred in reasonable reliance, but only up to the amount You paid (if any) for the SOFTWARE and/or the Hardware Device less reasonable depreciation based on actual use.The above remedy is subject to the following:Any repaired or replaced SOFTWARE or Hardware Device will be new or refurbished or serviceably used, comparable in function and performance to the original Hardware Device (or SOFTWARE), and may include third party items;Any SOFTWARE or Hardware Device repaired or replaced under this Limited Warranty will be warranted for the remainder of the original Warranty Period or 30 days from the date of shipment of the item back to You, whichever is longer. If an upgrade to SOFTWARE is delivered with a new limited warranty, then the terms of that new limited warranty will apply only to the SOFTWARE as upgraded, but will not apply to the original Hardware Device;Except as otherwise required by legislation in Your jurisdiction, costs associated with transport (including packaging) for warranty service shall be at Your expense; andMicrosoft does not provide any warranties regarding any other services provided under this Limited Warranty and disclaims all duties (if any) of workmanlike effort or of lack of negligence regarding such services.C. EXCLUSION OF OTHER DAMAGES. TO THE FULL EXTENT ALLOWED BY LAW, MICROSOFT AND ITS SUPPLIERS, AFFILIATES AND AGENTS ARE NOT LIABLE FOR ANY:(i) CONSEQUENTIAL OR INCIDENTAL DAMAGES;(ii) DAMAGES OR LOSS OF ANY NATURE WHATSOEVER RELATING TO LOST PROFITS, BUSINESS INTERRUPTION, LOSS OF DATA OR PRIVACY OR CONFIDENTIALITY, ANY INABILITY TO USE ALL OR PART OF THE HARDWARE DEVICE OR SOFTWARE, PERSONAL INJURY, OR ANY FAILURE TO MEET ANY DUTY (INCLUDING BUT NOT LIMITED TO ANY DUTY OF NEGLIGENCE, GOOD FAITH OR OF WORKMANLIKE EFFORT); OR(iii) INDIRECT, SPECIAL, OR PUNITIVE DAMAGES ARISING OUT OF OR RELATING IN ANY WAY TO THE SOFTWARE OR
16HARDWARE DEVICE. THE FOREGOING APPLIES EVEN IF MICROSOFT OR ANY SUPPLIER, AFFILIATE OR AGENT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES; AND EVEN IN THE EVENT OF FAULT, TORT (INCLUDING NEGLIGENCE), STRICT OR PRODUCT LIABILITY, MISREPRESENTATION OR OTHER REASON.Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusions many not apply to You.D. EXCLUSIONS FROM COVERAGE. This Limited Warranty shall not apply and Microsoft has no liability under this Limited Warranty if the SOFTWARE or Hardware Device:- is used for commercial purposes (including rental or lease) or purposes beyond the scope of the SOFTWARE license;- is modied or tampered with;- is damaged by Acts of God, power surge, misuse, abuse, negligence, accident, wear and tear, mishandling, misapplication, or other causes unrelated to defects in the Hardware Device or the SOFTWARE;- is damaged by programs, data, viruses, or les, or during shipments or transmissions;- is not used in accordance with the accompanying documentation and use instructions; or- is repaired, modied or altered by other than a Microsoft authorized repair center and the unauthorized center causes or contributes to any defect or damage.This Limited Warranty does not include any warranty regarding legal rights or abilities, such as any warranty regarding title, quiet enjoyment or lack of infringement.E. REGISTRATION. You need not register Your acquisition of the SOFTWARE and Hardware Device for the Limited Warranty to be effective.F. BENEFICIARY. To the extent allowed by applicable law, the Limited Warranty is only made to You, the rst licensed user of the SOFTWARE or purchaser of the Hardware Device, and there are no third party beneciaries of the Limited Warranty. Except as required by law, this Limited Warranty is not intended for and does not apply to anyone else, including anyone to whom You make any transfer as authorized in the Agreement.G. FURTHER INFORMATION. Microsoft is the warrantor under this Limited Warranty. To receive instructions for obtaining performance of this Limited Warranty You must either contact the Microsoft subsidiary serving Your country, or write to: Microsoft Sales Information Center, One Microsoft Way, Redmond, WA 98052-6399, USA, or visit Microsoft on the World Wide Web at must also:1. Submit proof of payment in the form of a bona de, dated receipt, or invoice (or a copy) evidencing that You are the beneciary of this Limited Warranty and that Your request for a remedy is made within the Warranty Period;2. Follow Microsoft’s shipping and other instructions if it determines that all or part of Your Hardware Device or SOFTWARE requires return. To obtain the Limited Warranty performance, You must take or deliver the item in either its original packaging or packaging that provides an equal degree of protection to the location specied by Microsoft. Except as otherwise required by legislation in Your jurisdiction, costs associated with transport (including packaging) for warranty service shall be at Your expense.3. Delete or remove any les or data You consider private or condential prior to sending the item to Microsoft.Failure to follow the above instructions may result in delays, cause You to incur additional charges, or may void Your warranty.This Limited Warranty gives You specic legal rights and You may also have other rights which vary from jurisdiction to jurisdiction. Where any term of this Limited Warranty is prohibited by such laws, it shall be null and void, but the remainder of the Limited Warranty shall remain in full force and effect if its allocation of risks is not materially disturbed.
17Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless otherwise noted, the example companies, organizations, products, domain names, e-mail addresses, logos, people, places, and events depicted herein are ctitious, and no association with any real company, organization, product, domain name, e-mail address, logo, person, place, or event is intended or should be inferred. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation. Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property. Microsoft Corporation grants the purchaser of this product the right to reproduce one (1) copy of this user manual for each Hardware Device you purchased in the package. © 2006 Microsoft Corporation. All rights reserved. Microsoft, IntelliEye, IntelliMouse, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks are property of their respective owners.

Navigation menu