Craftsman 917379430 User Manual 22 LAWN MOWER Manuals And Guides L0101245
CRAFTSMAN Walk Behind Lawnmower, Gas Manual L0101245 CRAFTSMAN Walk Behind Lawnmower, Gas Owner's Manual, CRAFTSMAN Walk Behind Lawnmower, Gas installation guides
User Manual: Craftsman 917379430 917379430 CRAFTSMAN 22 LAWN MOWER - Manuals and Guides View the owners manual for your CRAFTSMAN 22 LAWN MOWER #917379430. Home:Lawn & Garden Parts:Craftsman Parts:Craftsman 22 LAWN MOWER Manual
Open the PDF directly: View PDF .
Page Count: 32
|Open PDF In Browser||View PDF|
Owner's Manual JCRAFTSMAWI 6.0 HORSEPOWER 22" REAR DISCHARGE POWER PROPELLED ROTARY LAWN MOWER Model No. 917.379430 • • • • Safety Assembly Operation Maintenance • • Espa_ol Repair Parts CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment Sears, Roebuck and Co., Hoffman VisitourCraftsmanwebsite:www.sears.com/craftsman Estates, IL 60 Warranty ............................................... Safety Rules ......................................... Assembly .............................................. Operation .............................................. Maintenance Schedule ...................... Maintenance ....................................... LIMITED TWO YEAR WARRANTY 2 2 S 6 10 10 Product Specifications ........................ 11 Service and Adjustments .................... 14 Storage ............................................... 16 Troubleshooting ................................. 17 Repair Parts ........................................ 36 Parts Ordering ..................... Back Cover ON CRAFTSMAN POWER MOWER For two years from date of purchase, when this Craftsman Lawn Mower is maintained, lubricated, and tuned up according to the operating and maintenance instructions in the owner's manual, Sears will repair free of charge any defect in material or workmanship. If this Craftsman Lawn Mower is used for oommemial or rental purposes, this warranty applies for only 90 days from the date of purchase. This Warranty does not cover: • Expendable items which become worn during normal use, such as rotary mower blades, blade adapters, belts, air c_eaners and spark plug. • Repairs necessary because of operator abuse or negligence, including bent crankshafts and the failure to maintain the equipment according to the instructions contained in the owner's manual. Warranty service is available by returning the Craftsman power mower to the nearest Sears Service Center/Department in the United States, This warranty applies only while this product is in use in the United States. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., D/817 WA, Hoffman Estates, Illinois 60179 IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. hGENERAL OPERATION -" _.... !" Be sure the area is clear of other people before mowing. Stop machine if • Read, understand, and folJo_ all. anyone enters the area. instructions on the m.scl_r).e _'n"d[n_-_he Do not operate the mower when barefoot or wearing open sandals. ou.ghly_i.l_q_ 3,vJth tbe- coat rols and the Always wear substantial foot wear. proper use of the machine before .... . Do not pull mower backwards unless .stastmg .................... absolutely necessary. Always look • Do not put hands_r_e1'rlear or ur_der " ' down and behind before and while rotatif_j part_.'K'eep clear bfth-e'moving backwards. discharge opening at all time_." "'" • Do not operate the mower without • _nl_O'W-Tes_50"fi_ible-i_divi_gals, .who, proper guards, plates, grass catcher or are familiar with th_,(rLstr_ctJ.ons, to other safety protective devices in "_'p'_ra-ate-"_'emachine. ,: o,., • : place. • C.Lle,&LEL_aKea.oLob_ts41uch as 'roCks, • See manufacturer's instructions for proper operation and installation of toys, wire, bones, sticks, etc., which accessories. Only use accessories could be picked up and thrown by the approved by the manufacturer. blade. 2 • Stop the blade(s) when crossing gravel drives, walks, or roads. • Stop the engine (motor) whenever you leave the equipment, before cleaning the mower or unclogging the chute. • Shut the engine (motor) off and wait until the blade comes to complete stop before removing grass catcher. • Mow only in daylight or good artificial light. • Do not operate the machine while under the influence of alcohol or drugs. • Never operate machine in wet grass. Always be sure of your footing: keep a firm hold on the handle and walk; never run. • Disengage the self-propelled mechanism or drive clutch on mowers so equipped before starting the engine (motor). • If the equipment should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble. • Always wear safety goggles or safety glasses with side shields when operating mower. II. SLOPE OPERATION Slopes are a major factor related to slip and fall accidents which can result in severe injury. At1 slopes require extra caution. If you feel uneasy on a slope, do not mow it. DO: • Mow across the face of slopes: never up and down. Exercise extreme caution when changing direction on slopes. • Remove obstacles such as rocks, tree limbs, etc. • Watch for holes, ruts, or bumps. Tall grass can hide obstacles. DO NOT: • Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance. • Do not trim excessively steep slopes. • Do not mow on wet grass. Reduced footing could cause slipping. IlL CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them. • Keep children out of the trimming area and under the watchful care of another responsible adult. • Be alert and turn machine off if children enter the area. • Before and while walking backwards, look behind and down for small children. • Never allow children to operate the machine. • Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision. IV. SERVICE • Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive. - Use only an approved container. -Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke. -Never refuel the machine indoors. - Never store the machine or fuel container inside where there is an open flame, such as a water heater. • Never run a machine inside a closed area. • Never make adjustments or repairs with the engine (motor) running. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. • Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debds build-up. Clean oil or fuel spillage. Allow machine to cool before storing. • Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting. • Never attempt to make wheel height adjustments while the engine (motor) is running. • Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer's recommended parts, when necessary. • Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when sen/icing them. • Do not change the engine governor setting or overspeed the engine. 3 _Look for this symbol to point out important safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED. CAUTION: In order to prevent accidental starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot contact spark prug. _WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. _WARNING: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm, Wash hands after handling. A CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas. These accessories were available when this lawn mower was preduced. They are not shipped with your mower. They are also availableat most Bears retail outletsand service centers. Most Sears stores can also order repairparts for you, when you provide the model number of your lawn mower. Some of these accessories may not apply to your lawn mower. LAWN MOWER PERFORMANCE FOR REAR DISCHARGE LAWN MOWERS MULCHER KITS %ooccs o REAR DISCHARGE LAWN MOWERS STAB/LIZER SIDE DISCHARGE LAWN MOWERS GAS CANS LAWN MOWER MAINTENANCE MUFFLERS BELTS AIR FILTERS BLADES BLADE ADAPTERS 4 SPARK PLUGS WHEELS ENGINE elL Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower. IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. To ensure safe and proper operation of your fawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessanj to ensure proper tightness. TO REMOVE CARTON LAWN MOWER Operator presence control bar Upper Lift up Mewing TO INSTALL ATTACHMENTS Your lawn mower was shipped ready to be used as a mulcher, To convert to bagging or discharging: Open rear door and remove mulcher plug, Store mulcher plug in a safe place. You can now install catcher or optional clipping deflector. • To return to mulching operation, install mulcher plug into discharge opening of mower. w_ItCAUTION: Do not run your lawn mower hout mulcher plug in place or approved clipping deflector or grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open. FROM 1. Remove loose parts included with mower, 2. Cut down two end corners of carton and lay end panel down flat. 3. Remove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle. 4. Roll lawn mower out of carton and check cadon thorougly for additional loose pads, HOWTO SET UPYOUR LAWN MOWER TO UNFOLD HANDLE IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables, 1. Raise handles until lower handle section locks into place in mowing position. 2. Remove protective padding, raise upper handle section into place on lower handle and tighten both handle knobs. 3. Remove handle padding holding operator presence control bar to upper handle. Your lawn mower handle can be adjusted for your mowing comfort. Refer to "Adjust Handle" in the Service and Adjustments section of this manual. Mulcher plug 5 KNOWYOUR LAWN MOWER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future These symbols may appear on your lawn mower or in literature supplied with the product. Learn and understand their meaning. CAUTION OR WARNING ENGINE ON ENGJNE OFF FA_T SLOW CHOKE FUEL OIL DANGER, KEEP _ANO$ AND FEET AWAY control bar Throttle control lever Starter I cable Grass catcher, w/dipstick Mulcher plug Prime IMPORTANT: This lawn mower is shipped without oil or gasoline in the engine. MEETS CPSC SAFETY Wheel adjuster (on every wheel) REQUIREMENTS Sears rotary walk-behind power lawn mowers conform to the safety standards of the American National Standards Institute and the U.S. Consumer Product Safely Commission. The blade turns when the engine is running. Operator presence control bar - must be held down to the handle to stad the engine. Release to stop the engine. Primer - pumps additional fuel from the carburetor to the cylinder for use when starting a cold engine. Starter handle- used for starting the engine. Drive control lever - used to engage power-propelled forward motion of lawn mower, Muleher plug - must be removed to convert to bagging or discharging operation, Throttle control - Used for starting the engine and allows you to select either fast or slow engine speed. Theoperation of any lawn mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses. HOWTO ENGINE USEYOUR SPEED LAWN MOWER The engine speed is controlled by a throttle located on the side of the upper handle. Fast position is for starting, normal cutting, trimming and better grass bagging. Slow position is for light cutting, trimming and fuel economy. "€_ Slow Fas, :i Plate Tab Lower Wheels for High Cutr_'L__L_-_A_ Lever RaiseWheels for Low Cut TO ATTACH GRASS CATCHER 1, Lift the rear door of the lawn mower and place the grass catcher frame side hooks onto the door pivot pins, 2, The grass catcher is secured to the lawn mower housing when the rear door is lowered onto the grass catcher frame. _I, CAUTION: Do not run your lawn mower without clipping deflector or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open, Pivotpins Rear door Grass catcher handle ENGINE ZONE CONTROL _I_CAUTION: Federal regulations require an engine control to be installed on this lawn mower in order to minimize the risk of blade contact injury. Do not under any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running, • Your lawn mower is equipped with an operator presence control bar which requires the operator to be positioned behind the lawn mower handle to start and operate the lawn mower. TO ADJUST CUTTING HEIGHT Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit your requirements. Medium position is best for most lawns. To change cutting height, squeeze adjuster lever toward wheel, Move wheel up or down to suit your requirements, Be sure all wheels are in the same setting. NOTE: Adjuster is properly positioned when plate tab inserts into hole in lever. Also, 9-position adjusters (if so equipped) allow lever to be positioned between the plate tabs. Catcher frame hook \ TO EMPTY GRASS CATCHER 1. Lift up on grass catcher using the frame handle. 2. Remove grass catcher with clippings from under lawn mower handle. 3. Empty clippings from bag using both frame handle and bag handle. NOTE: Do not drag the bag when emptying; it will cause unnecessary wear. ( irass catcher frame handle DRIVE CONTROL ADD GASOLINE • Self-prepelling is controlled by holding the operator presence control bar down to the handle and pushing the drive control lever forward until it clicks; then releasing the lever. • Forward motion will stop when the operator presence control bar is released. To stop forward motion without stopping engine, release the operator presence control bar slightly until the drive control disengages. Hold operator presence control bar down against handle to continue mowing without self-propelling. • To keep drive control engaged when turning corners, push down on handle and lift front wheels off ground while turning lawn mower, NOTE: Before filling fuel tank, remove and discard the debds plug that is inside the tank. • Fill fuel tank. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline, Purchase fuel in quantities that can be used within 30 days to assure fuel freshness. _WARNING: Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additionaJ information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. _1, CAUTION: Fill to bottom of gas tank filler neck. Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame. Gasoline . • filler cap._mi_L _lEnglne oilcap Operator presence control bar I _ Drive _ Drive \'control _,_control To engage drive control Drive control disengaged BEFORE STARTING ADD OIL ENGINE Your lawnmower is shipped without oil in the engine. Engine holds 20 oz. of oil. For type and grade of oil to use, see =ENGINE" in Maintenance section of this manual. 1. Re sure lawnmower is level and area around oil fill is clean. 2. Remove engine oil cap and fill to the full line on the dipstick. Pour oil slowly. Do not over fill. NOTE: Allow oil to settle down into engine for accurate dipstick reading, To read proper level, tighten engine oil cap, then remove it to read the dipstick. 3. Reinstall engine oil cap and tighten. • Check oil level before each use. Add oil if needed. Fill to full line on dipstick. • Change the oil after every 25 hours of operation or each season. You may need to change the oil more often under dusty, dirty conditions. (Discard II_i_L_ debris plug +del IrJ TO START ENGINE NOTE: Due to protective coatings on the engine, a small amount of smoke may be present during the initial use of the product and should be considered normal. 1. To start a cold engine, push primer three (3) times before trying to start. Use a firm push. This step is not usually necessary when starting an engine which has already run for a few minutes. 2. Move throttle control lever to fast position. 3. Hold operator presence control bar down to the handle and pull starter handle quickly. Do not arlow starter rope to snap back. TO STOP ENGINE • To stop engine, release operator presence control bar. NOTE: In cooler weather it may be necessary to repeat pdming steps. In warmer weather over priming may cause flooding and engine will not start. If you do flood engine, wait a few minutes before attempting to start and do not repeat priming steps. MOWINGTIPS • Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of grass clippings. It may also be necessary to reduce ground speed and/or run the lawn mower over the area a second time. • For extremely heavy cutting, reduce the width of cut by overlapping previously cut path and mow slowly. • For better grass bagging and most cutting conditions, the engine speed should be set in the fast position. • When using a rear discharge lawn mower in moist, heavy grass, clumps of cut grass may not enter the grass catcher. Reduce ground speed (pushing speed) and/or run the lawn mower over the area a second time. • If a trail of clippings is left on the right side of a rear discharge mower, mow in a clockwise direction with a small ovedap to collect the clippings on the next pass. • Pores in cloth grass catchers can become filled with dirt and dust with use and catchers will collect less grass. To prevent this, regularly hose catcher off with water and let dry before using. • Keep top of engine around starter clear and clean of grass clippings and chaff. This will help engine air flow and extend engine life. MULCHING MOWING TIPS IMPORTANT: For best performance, keep mower housing free of built-up grass and trash. See "Cleaning" in MAINTENANCE section of this manual, • The special mulchingblade will reout the grass clippings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. Also, the mulched grass will biodegrede qulcPJyto provide nutrients for the lawn. Always mulch with your highest engine (blade) speed as this will provide the best recuttingactionof the blades. • Avoidcuttingyour lawn when it is wet. Wet grasstends to form clumps and interferes with the mulchingaction.The best time to mow your lawn is the early afternoon. At thistime the grass has dried and the newly cut area will not be exposed to the direct sun. • For best results,adjustthe lawn mower cuttingheight sothat the lawn mower cuts offonly the top one-thirdof the grass blades. If the lawn is overgrown it will be necessary to raise the height ofcut to reduce pushing effortand to keep from overloadingthe engine and teaving clumps of mulchedgrass. For extremely heavy mulching,reduce your width of cut by overlappingpreviouslycut path and mow slowly. • Certain types of grass and grass conditions may require that an area be mulched a second time to completely hide the clippings. When doing a second cut, mow across or perpendicular to the first cut path. • Change your cutting pattern from week to week. Mow north to south one week then change to east to west the next week. This will help prevent matting and graining of the lawn. Max, 1/3 s¥oocoMP M O Check for Loose Fasteners Clean/Inspect Grass Catcher (If Equipped) Clean Lawn Mower o _' _ I__ Id# y_ (Power-Propelled Clean Under DdveMowers) Cover Check ddve belt/ ulleys RE (p owe r-propeu le_IPM ower s) Check/Shar pen/Replace Blade IV# _ Lubrication Chart Clean Battery/Rechar IElectdc Stad Mowe_ e E Check Engine Oil Level N Change Engine Oil I/ v' I/ v', I_ fl/1.= G Clean Air Filter ii/ I N inspect Muffler Clean or Replace Spark Plug ¥_ ¥1 E Replace Air Filter Paper Cartridge I . change n'_0_e Of_ When op_rat L,_ iJr_er IV#2 a heavy Ioa_d or In h_Jh arP_bient temperalures. 2 Service more often when ope_tlng ifl didy or dusty _onddic_s 3 Replac_ b_ades mo_e olten when mowing In sandy SOil 4 - Charge 48 t_urs at end of season, GENERAL = LUBRICATION CHART RECOMMENDATIONS The warranty on this tawn mower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain mower as instructed in this manual. Some adjustments will need to be made periodically to properly maintain your unit. All adjustments in the Service and Adjustments section of this manual should be checked at least once each season. • Once a year, replace the spark plug, cleaR or replace air filter element and check blade for wear. A new spark plug and clean/new air filter element assures proper air-fuel mixture and helps your engine run better and _ast longer. • FalSaw the maintenance schedule in this manual BEFORE EACH USE 1. Check engine oil level. 2. Check for loose fasteners. LUBRICATION Keep unit well lubricated CATION CHART"). (See "LUBRI- _Wheel Adjustor __)| bracket mounting pin (_ (_ Refer to maintenance Spray lubricant Rear door hinge "Engine" section, IMPORTANT: Do not oil or grease plastic wheel bearings, viscous lubricants will attract dust and dirt that will shorten the life of the self-lubricating bearings, if you feel they must be lubricated, use only a dry, powdered 10graphite type lubricant sparingly. PRODUCT SPECIFICATIONS SERIAL NUMBER DATE OF PURCHASE GASOLINE CAPACITY/TYPE: 1.6 QUARTS UNLEADED OILTYPE (API-SF-SJ): REGULAR OIL CAPACITY: SAE 30 (ABOVE 32°F) SAE 5W-30 (BELOW 32°F) 20 OZS. SPARK PLUG(GAP: .030") BLADE BOLT TORQUE: CHAMPION RC12YC 35-40 FT. LBS. • The model and serial numbers will be found on a decal attached to the rear of the lawn mower housing.Record both serial number and date of purchase in space provided above. LAWN MOWER TO REPLACE BLADE Always ebsewe safety rules when performing any maintenance, TIRES 1. Position the blade adapter on the engine crankshaft. Be sure key in adapter and crankshaft keyway are aligned. 2. Position blade on the blade adapter aligning the two (2) hotes in the blade with the raised lugs on the adapter. 3. Be sure the trailing edge of blade (opposite sharp edge) is up toward the engine. 4. Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft. 5. Use block of wood between blade and lawn mower housing and tighten the blade bolt, turning clockwise. • The recommended tightening torque is 35-40 ft. Ibs. IMPORTANT: Blade bolt is grade 8 heat treated. • Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber. • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage. BLADE CARE For best results, mower blade must be kept sharp. Replace bent or damaged blades. TO REMOVE BLADE 1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug. 2. Turn lawn mower on its side. Make sure air filter and carburetor are up. 3. Use a wood block between blade and mower housing to prevent blade from turning when removing blade bolt. NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth. 4. Remove blade bolt by turning counterclockwise. 5. Remove blade and attaching hardware (bolt, lock washer and hardened washer). NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged. TO SHARPEN BLADE NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced. Care should be taken to keep the blade balanced. An unbalanced blade will cause eventual damage to lawn mower or engine. • The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower. 11 • To check blade balance, drive a nail into a beam or walt. Leave about one inch of the straight nail exposed. Place center hole of blade over the head of the nail. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced. Blade adapter Crankshaft Key_ keyway Lockwasherr_ GEAR CASE • To keep your drive system working properly, the gear case and area around the drive should be kept clean and free of trash build-up. Clean under the drive cover twice a season. • The gear case is filled with lubricant to the proper level at the factory. The only time the lubricant needs attention is if service has been performed on the gear case. • If lubricant is required, use only Texaco Starplex Premium 1 Grease, Part No. 750369. Do not substitute. ENGINE LUBRICATION Hardened washer Tr mg edge Use only high quality detergent oil rated with API service classification SF-SJ. Select the oil's SAE viscosity grade according to your expected operating temperature. Blade adapter GRASS CATCHER • The grass catcher may be hosed with water, but must be dry when used. • Check your grass catcher often for damage or deterioration. Through normal use it will wear. If catcher needs replacing, replace only with a manufacturer approved replacement catcher. Give the lawn mower model number when ordering. DRIVE WHEELS Check front drive wheels each time before you mow to be sure they move freely. The wheels not turning freely means trash, grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels. If necessary to clean the drive wheels, check both front wheels. 1. Remove hubcaps, hairpin cotters and washers. 2. Remove wheels from wheel adjusters. 3. Remove any trash or grass cuttings from inside the dust cover, pinion and/ or drive wheel gear teeth. 4. Put wheels back in place. NOTE: If after cleaning, the drive wheels do not turn freely, contact your nearest authorized service center. NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°E Check your engine oil level more frequently to avoid possible engine damage from running low on oil. Change the oil after every 25 hours of operation or at least once a year if the lawn mower is not used for 25 hours in one year. Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil plug securely each time you check the oil level. 12 TO CHANGE ENGINE OIL Cover tabs NOTE: Before tipping lawn mower to drain oil, drain fuel tank by running engine until fuel tank is empty. 1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug. 2. Remove engine oil cap; lay aside on a clean surface. 3. Tip lawn mower on its side as shown and drain oil into a suitable container. Rock lawn mower back and forth to remove any oil trapped inside of engine. 4. Wipe off any spilled oil on lawn mower and on side of engine. 5. Fill engine with oil. (See "Add Oil" in the Operacion section of this manual.) 6. Reconnect spark plug wire to spark plug. / _ L_..,_ Back plate Cover Cartridge MUFFLER Inspect and replace corroded muffler as it could create a fire hazard and/or damage. SPARK PLUG Replace spark plug at the beginning of each mowing season or after every 100 hours of operation, which ever occurs first, Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS" section of this manual, / CLEANING Container IMPORTANT: For best performance, keep mower housing free of built-up grass and trash. Clean the underside of your mower after each use. _,CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with the spark plug. • Clean the underside of your lawn mower by scraping to remove build-up of grass and trash. • Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shorfens engine life. • Keep finished surfaces and wheels free of all gasoline, oil,etc. • We do not recommend using a garden hose to clean lawn mower unless the electrical system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in shortened engine life. AIR FILTER Your engine will not run properly and may be damaged by using a dirty air filter. Replace the air filter every year or after every 100 hours of operation, more often if you mow in very dusty, dirty conditions. Do not wash air filter. TO 1. 2. 3. CLEAN AIR FILTER Loosen screw and tilt cover to remove. Carefully remove cartridge. Clean by gently tapping on a flat surface. If very dirty, replace cartridge. ACAUTION: Petroleum solvents, such as kerosene, are not to be used to clean cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry cartridge. 4. Install cartridge, then replace cover making sure the tabs are aligned with the slots in the back plate. Fasten screw securely. CLEAN UNDER DRIVE COVER Clean under drive cover at least twice a season. Scrape underside of cover with putty knife or similar tool to remove any build-up of trash or grass on underside of drive cover. 13 TO ADJUST HANDLE _,CAUTION: Before performing any service or adjustments: 1. Release control bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. 3. Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug. LAWN MOWER TO ADJUST CUTTING HEIGHT See "TO ADJUST CUTTING HEIGHT" in the Operation section of this manual. REAR DEFLECTOR The handle can be mounted in a high or low position. The mounting holes in the bottom of lower handle are off center for raising or lowering the handle. 1. Remove upper handle and all parts attached to lower handle. 2. Remove hairpin cotters from lower handle bracket mounting pin. 3. Squeeze lower handle in to remove it from mounting pins. 4. Turn lower handle over to raise or lower handle. 5. Squeeze lower handle in and position holes onto mounting pins on handle bracket. 6. Reassemble upper handle and all parts removed from lower handle. The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator mowing position. If the deflector becomes damaged, it should be replaced. TO REMOVE/REPLACE DRIVE BELT 1. Remove drive cover. Remove belt from gearcase pulley by pushing down on pulley and rolling belt off it. 2. Turn lawn mower on its side with air filter and carburetor up. 3. Remove blade. 4. Remove debris shield. 5. Remove belt from engine pulley on crankshaft. 6. Install new belt by reversing above steps. 7. Always use factory approved belt to assure fit and long life. Lower handle Rotate cover Push down 14 TO ASSEMBLE GRASS CATCHER 1. Put grass catcher frame into grass bag with rigid part of bag on the bottom. Make sure the frame handle is outside of the bag top. 2. Slip vinyl bindings over frame. NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before using. ACAUTION: Do not run your lawn mower without clipping deflector or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open. handle '_J \ "_ / ,/ _) Frame opening ENGINE ENGINE SPEED Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that the engine is running too fast or too slow, take your fawn mower to a Sears or other qualified service center. CARBURETOR Your carburetor has a non-adjustable fixed main jet for mixture control. If your engine does not operate propedy due to suspected carburetor problems, take your lawn mower to a Sears or other qualified service center for repair and/or adjustment. IMPORTANT: Never tamper with the engine governor, which is factory set for proper engine speed. Overspeeding the engine above the factory high speed setting can be dangerous. If you think the engine-governed high speed needs adjusting, contact your nearest Sears or other qualified service center, which has proper equipment and experience to make any necessary adjustments. 15 immediately prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more. ENGINE FUEL SYSTEM IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose, or tank during storage. Also, experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. 1. Drain the fuel tank. 2. Start the engine and let it run until the fuel lines and carburetor are empty. • Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. • Use fresh fuel next season. NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container, Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer. ENGINE OIL LAWN MOWER When lawn mower is to be stored for a period of time, clean it thoroughly, remove all did, grease, leaves, eto. Store in a clean, dry area. 1. Clean entire lawn mower (See "CLEANING" in the Maintenance section of this manual). 2. Lubricate as shown in the Maintenance section of this manual. 3. Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary. 4. Touch up all rusted or chipped paint surfaces; sand lightly before painting. HANDLE You can fold your lawn mower handle for storage. 1. Squeeze the bottom ends of the lower handle toward each other until the lower handle clears the handle bracket, then move handle forward. 2. Loosen upper handle mounting bolts enough to allow upper handle to be folded back. IMPORTANT: When folding the handle for storage or transportation, be sure to fold the handle as shown or you may damage the control cables. • When setting up your handle from the storage position, the lower handle will automatically lock into the mowing position. Lower handle Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual). CYLINDER t. Remove spark plug. 2. Pour one ounce (29 ml) of oil through spark plug hole into cylinder. 3. Pull starter handle slowly a few times to distribute oil. 4. Replace with new spark plug. OTHER Handle bracket Squeeze to fold Operator presence Upper Handle Fold forward for storage Lower • Do not store gasoline from one season to another. • Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems. • if possible, store your unit indoors and cover it to give protection from dust and dirt. • Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your unit to rust. Hairpin cotter control bar ,;' U Fo_d backward Mowing position 16 IMPORTANT: Nevercovermower while engone and exhaust areas are still warm. TROUBLESHOOTING PROBLEM Does not start CAUTiON:Never store the lawn mower with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure. CHART CAUSE CORRECTION 1. Dirty air filter. 2. Out of fuel. 3. Stale fuel. 4. Water in fuel. 5. Spark plug wire is disconnected. 6. Bad spark plug. 7. Loose blade or broken blade adapter. 8. Control bar in released position. 9. Control bar defective. Loss of power 1. Rear of lawn mower housing or cutting blade dragging in heavy grass. 2. Cutting too much grass. 3. Dirty air filter. 4. Buildup of grass, leaves, and trash under mower. 5. Too much oil in engine. 6. Walking speed too fast. Poorcutuneven 1. Worn, bent or loose blade. 2. Wheel heights uneven. 3. Buildup of grass, leaves and trash under mower. Excessive vibration 1. Worn, bent or loose blade. 2. Bent engine crankshaft. Starter rope hard to pull 1. Engine flywheel brake is on when control bar is released. 2. Bent engine crankshaft. 3. Blade adapter broken. 4. Blade dragging in grass. 17 1. Clean/replace air filter. 2. Fill fuel tank. 3. Drain tank and refill with fresh clean fuel. 4. Drain fuel tank and carburetor and refill tank with fresh gasoline. 5. Connect wire to plug. 6. Replace spark plug. 7. Tighten blade bolt or reprace blade adapter. 8. Depress control bar to handle. 9. Replace control bar. 1, Set to "Higher Cut" position. 2. Set to "Higher Cut" position. 3. Clean/replace air filter. 4. Clean underside of mower housing. 5. Check oil level. 6. Cut at slower walking speed. 1. Replace blade. Tighten blade bolt. 2. Set all wheels at same height 3. Clean underside of mower housing. 1. Replace blade. Tighten blade bolt. 2. Contact an a Sears or other qualified service center. 1. Depress control bar to upper handle before pulling starter rope. 2. Contact a Sears or other qualified service center. 3. Replace blade adapter. 4. Move lawn mower to cut grass or to hard surface. TROUBLESHOOTING PROBLEM CHART CAUSE CORRECTION Loss of drive 1, Drive wheels not turning with drive control engaged, 2, Belt not driving 1, Adjust or replace drive control cable, 2. Put belt on pulleys or replace belts if broken, Grass catcher notfilling(ifso equipped) 1, Cutting height too low. 2, Lift on blade worn off. 3. Catcher not venting air. 1. Raise cutting height. 2. Replace blade. 3. Clean grass catcher, Hard to push 1. Grass is too high or wheel height is too low. 2. Rear of lawn mower housing or blade dragging in grass. 3. Grass catcher too full. 4. Handle height position not right for you. 1, Raise cutting height. 18 2. Raise rear of lawn mower housing one (1) setting higher. 3. Empty grass catcher. 4. Adjust handle height to suit. ROTARY LAWNMOWER -- MODEL NO. 917.379430 GEAR CASE ASSEMBLY PART NUMBER 702511 1 I KEY NO. PART NO. 1 2 3 4 6 17490416 137055X004 137053 57072 48373 7 8 9 10 11 77881 137051 137074 57079 131484 KEY NO, DESCRIPTION Tapping Screw I/4-20 x 1-1/4 Engagement Bracket Shifter Seal Gear Case Halves Kit (Includes Key NOS. 4, and 7) Beadng Worm Shaft Ddve Shaft HardenedWasher Clutch Yoke 12 13 14 15 16 17 18 19 PART NO. 700343 86447 137050 750436X 750069 12000003 850848 81585X004 DESCRIPTION Bushing Plug Helical Gear Clutch Jaw Grease E-Ring HFProKey Spring Bracket NOTE: All component dimensions given in U.S. Inches. 1 inch = 25.4 mm 35 ROTARY LAWNMOWER MODELNUMBER917.379430 13 69 66 27 22 3O lO 28 14 31 -' 35 lO_ 59 65 20 5 37 35 27 30 47 41 "50 ROTARY LAWN MOWER MODEL NUMBER 917.379430 KEY PART NO. NO. 1 2 4 5 6 5 9 10 11 12 13 14 15 16 1"/ 18 20 22 23 25 27 28 29 30 31 :3_ 34 35 37 39 40 166860X479 130861 150425 66426 136376 146771 170947 128415 15(7350 STD512.505 77400 156374X479 700_65X479 176655X479 140661 X479 63601 140540 84596 87677 83923 151158 142748 62335 145935X004 7010_37 70033IX(X}4 146630 70(_25X007 150078 173569X479 173570X479 DESCRIPTION Upper Handle Engine Zone Control Cable Mulcher Plug WireTle Handle Knob Control Bar Rear Door Kit Pop Rivet Self Tapping Screw #10-24 x 5/8 Hex Tapping Screw w/$ems 1/4-20 x 1/2 Hubcap _mk P_te Side Baffle Dlecharge Baffle Rear Ba_e Keps Locknut 1/4-20 Rear Skid En_ne puttey Hi-Pro Key #505 Hex Range Nut Whe_ Shoulder Bolt 3/8-16 x 1 Spdng washer Axle Arm Assembly Selector Knob Selector Spring Spacer Wheel Adjus_ng Bracket Thread Cuffing Screw w/Seres 5/16-1 g x 3/4 Handle Bracket Assembly (Left) Handle Bracket Assembly (Right) KEY NO. 41 44 46 47 48 49 50 51 52 55 56 57 58 59 61 62 64 65 66 67 68 69 71 72 73 -- - PART NO, DESCRIPTION 150406 172835 851514 141114 851074 850263 851084 1700_1 85463 751592 88652 5179_ 151590X479 131959 132001 134612 ...... 17600406 700417 144929 111190X 83816 170939 170938 165912 161058 177291 Hex t-_eadThread Rc4Ling Screw 3/B-16 _(1-1/_ Lawn Mower Housing (Incl. Key #14,15, 51 ) Blade Adepter B,_ade22" Hardened Washer Helleal Washer 3/8-24 x 1-3/8 Gr. 8 Rex Head Machthe Screw 3/8-24 x 1-3JB Gr, B Front Baffle Kit Danger Decal Locknut 3/8-16 Hinge Screw 1/4-20 x 1-1/4 Hairpin Cotter Lower Handle Handle Boft RopaGuide Debds Shield Engine. ModelBriggsandStratton11A602-O152-E1 Screw Hx Serrated 1/4 x 20 Throtde contro_ Screw P-_*_ble Ctar¢_ Screw Swing RH SpringLH Bolt Warning Decal (Not Shown) Ownef s Manual (English/$panist_) Available accessories not included with lawn mower: -D/98 33313 ClippthgDehector - 71 33300 SAE 30W Oil (20 oz,) ROTARY LAWN MOWER MODEL NU MBER 917.379430 11 / 54 18 14 15 -31 18 14 13 12 16 ,8 ROTARY LAWN MOWER MODEL NU MBER 917.379430 KEY NO. PART NO. 1 3 4 5 6 8 9 11 12 13 14 15 16 18 145755 751152 158755 146527 150495 774O0 145212 151156 12O00058 137054 88O8O 88118 67725 701037 DESCRIPTION Control Cable Assembly Locknut #10-24 pan Head Machine Screw 1/4 x 2.12 V-Belt Spring Retainer Hubcap Flanged Nut Wheel & Tire Assembly E-Ring Firdon Dust Cover Felt Washer Washer 1/2 x 1-1/2 x.134 Selector Knob KEY PART NO. NO. 26 28 31 35 36 37 38 40 41 54 55 57 143603 154990 132010 137052 151521 702511 137090 63601 75192 151520 169932 86012 169931 DESCRIPTION Pan Head Tapping Screw #1 0-24 x 2-3/4 Dnve Cover Hex Flange Nut Drive Pulley Wheel Adjuster Assembly (Left) Gear Case Assembly spm_ Nut Spring Wheel Adjuster Assembly (Right) Grassbag Assembly Driveshaft Cover FraTe BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NO. 11A602 TYPE NO. 0152-E1 se4_ 993 s84_ 'i__ _'_"_ t_ 585 16; 529 _ :_, 11 "k REQUIRESSPECIALTOOLS TO INSTALL.SEE REPAIR INSTRUCTIONMANUAL. 227 _ 615 562 404 c 616 32 24/ 977 CARBURETOR ._ t 51_ _ === GASKET SET 633_2_ le3i,_,_ _., 4O BRIGGS & STRA'I-FON 4-CYCLE ENGINE MODEL NO. 11A602 TYPE NO. 0152-E1 425' '_ , _ 331 _ i !¸ 968 _ 'J 104 122 163 365 9751 i 127 130 ' _ 276_ 95 _:_ L_ ...... 276 _'-_ 745 _ 922 ._ 202-_ CJ 51 ; I I 190 _(_ 613A_ 842 883 o13. I i L 524 r : : 670 _: | , I 1036 LABEL KIT-EMISSION I 11Ol, K'T-_BEL I I 1058 OWNER'S MANUAL 48 I 41 209 BRIGGS & STRATTON 4-CYCLE ENGINE MODEL NO. 11A602 TYPE NO. 0152-E1 / • 1211 305_, #- I • 37 21 CARBURETOR 633 _ 127 _i, ' 104' 134_1 OVERHAUL _, KIT 276 __ _ 163 '_) ! 358 ENGINE GASKET SET 868% 163 20 t_ ' 1095 VALVE GASKET SET ,_J 993_ 42 122!i_ii i 7:'_ i\i_, 163 _'_ _,, MODEL NO. 11A602 TYPE NO, 0152-E1 BRIGGS & STRATTON 4-CYCLE ENGINE KEY NO. 1 3 4 5 7 8 9 10 11 12 13 15 16 20 22 23 24 25 27 28 29 32 33 34 35 36 37 40 43 45 46 48 PART NO. 692670 299819 499619 695276 695166 495786 272481 691125 499678 692232 691137 691680 692676 399781 691092 692452 222696 499429 499430 499431 499432 499425 499426 499427 499428 691866 499423 692671 691664 499642 499641 691304 691304 694086 692194 691997 690977 694039 692745 51 55 58 692668 691421 692259 60 65 76 95 97 104 117 281434 690837 691108 691636 499682 691242 498978 498975 692703 26 121 DESCRIPTION Cylinder Assembly • Seal-Oil (Magneto Side) Sump-Engine Head-Cylinder ,+ Gasket-Cylinder Head Breather Assembly • Gasket-Breather Screw (Breather Assembly) Tube-Breather * Gasket-Crankcase Screw Cylinder Head) Plug-Oi Dran Crankshaft • Seal-Oil PTO Side) Screw (Engine Sump Flywheel Key- Ftywheal Piston Assembly (Standard) Piston Assembly (.010 O.S,) pfston Assembly (.020 O.S.) Piston Assembly (.030 O.S.) Ring Set-Piston (Standard) Ring Set-Piston (.010 O.S.) Ring Set-Piston (.020 O.S.) Ring Set-Piston (.030 O.S. ) Lank-Piston Pin Pin-Piston Rod-ConnectLng Screw (Connecting Rod) Valve-Exhaust Valve-Intake Spring-Valve (Intake) Spring-Valve (Exhaust) Guard-Flywheel Retainer-Valve Stinger-Governor/Oil Tappet-Valve Camshaft Short Block (Replacement Engine 121602-0015-E1) ° G:_:+Gasket-lntake Housing-Rewind Starter Rope-Starter (Cut to Required Length) Grip-Starter Rope Screw (Rewind Starter) Screw (F_ywheel Guard) Screw (Throttle Valve) Shaft-Throt6e (3 Pin-Float Hinge Jet-Main (Standard) Jet-Main High Altitude) Kt-Carburetor Overhau 125122694202692799 ° (3CCarburetor+Spacer-Carburet°r 127 694468 (3 Plug-Welch 136 691203 Valve-Thro01e 133 398187 F_oat-Carburetor 134 398188 O Valve-Needle/Seat 137 693981 (31:Gasket-Float Bowl KEY NO. 146 155 163 167 PART NO. 690979 695882 692667 691050 188 192 190 202 209 222 227 238 276 287 300 304 305 332 333 334 337 356 358 363 365 383 404 425 443 693168 694543 690940 691303 691851 692672 691467 691300 271716 690940 693982 499677 690960 690662 802574 691061 692051 692390 694090 19069 691136 19374 690272 690670 691637 443A 692523 445 491588 455 691219 456 692299 459 281505 505 231082 523 495264 524 692296 525 495265 529 692937 562 94652 564 693808 584 692342 585 691879 592 690800 597 691696 601 95162 604 692669 608 497680 613691108 613A 691140 615 (3 :_ + 690340 Included 358 Included No. 121 Included NO. 977 Included 1095 DESCRIPTION Key-Timing Plate-Cylinder Head ,,_l_:+Gasket-Air Cleaner Line-Fuel (Cut to Required Length) Screw (Control Bracket) Adjuster-Rocker Arm Screw (Fuel Tank) Link-Mechanical Governor Spring-Governor Bracket-Control Control Lever-Goverr_or Cap-Valve (3_Sealing Washer Screw (DipalickTube) Muffler Housin_B]ower Screw _.lower Housing) Nut (Flywheel) Armature-Magneto Screw (Armature Magneto) Spark Plug Wire-Stop Engine Gasket Set Flywheel Puller Screw (Carburetor) Wrench-Spark Plug Washer (Governor Crank) Screw (Air Cleaner Cover) Screw (Air Cleaner Primer Base) Screw (Air Cleaner Primer Base) Filter-Air Cleaner Cattbdge Cup-Flywheel Plate-Pawl Friction Pawl-Ratchet Nut (Governor Control Lever) Oipstk_k ° Seal-Dipstick Tube Tube-Dipstick Grommet Bolt (Governor Control Lever) Screw (Control Cover) Cover-Breather Passage • Gasket-Breather Passage Nut (Rewind Starter) Screw (Pawl Friction Plate) Clamp-Hose Cover-Control Starter-Rewind Screw (Muffler) Screw ()Muffler Retainer-Governor Shaft in Engine Gasket Set, Key. No. in Carburetor Overbaul Kit, Key. in Carburetor Gasket Set, Key in Valve Gasket Set, Key. No. NOTE= All component dimensions given in U.S. inches 1 inch = 25.4 mm 43 BRIGGS & STRATTON 4-CYCLE ENGINE KEY NO. 616 619 621 633 635 670 684 PART NO. 691306 691108 692310 691321 66538 692294 690345 689 718 741 745 830 842 847 851 868 883 914 922 923 925 930 957 966 968 972 975 976 977 993 1005 1019 1022 1023 1026 1029 1034 1036 1058 1095 1210 691855 690959 691830 691648 694544 691031 692017 493880 692044 691893 691108 692831 691994 690595 691919 397974 692673 692298 495224 493640 496115 692704 694088 691346 695811 691890 499624 692045 691230 691343 695109 274782 694091 498144 1211 498144 O :_ + included 358 Included No. 121 Included No. 977 Included 1095 MODEL NO. 11A602 TYPE NO. 0152-E1 DESCRIPTION Crank-Governor Screw (Cylinder Head Plate) Switch-Stop Q:i:SeaI-Throttle Shaft Boot-Sparkplug Spacer-Fuel Tank Screw (Breather Passage Cover) Spring-Friction Pin-Locating Gear-Timing Screw Brake) Stud Rocker Arm • SeaI-O Ring (Dipstick Tube) Assembly-Dipstick/Tube TerminaI-Sparkplug ,+ Seal-Valve ,+ Gasket-Exhaust Screw (Rocker Cover) Spring-Brake Breke Cover-Linkage Guard-Rewind Cap-Fuel Tank Base-Air Cleaner Primer Cover-Air Cleaner Tank-Fuel Bowl-Float Primer-Carburetor Set-Carburetor Gasket ,+ Gasket-Cylinder Head Plate Fan-Flywheel Kit-Label ,+ Gasket-Rocker Cover Cover-Rocker Arm Rod-Push Arm-Rocker Guide-Push Rod Label-Emissions Owner's Manual Set-Valve Gasket Assembly-Pulley/Spring (Pulley) Assembly-Pulley/Spring (Spring) in Engine Gasket Set, Key. No. in Carburetor Overhaul Kit, Key. in Carburetor Gasket Set, Key. in Valve Gasket Set. Key. NO. NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm 44 45 46 47 Get it fixed, at your home or ours! For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOME s. Anytime, day or night (1-800-.4694663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anytime, day or night www.sears.com For the replacement parts, accessories and owner's manuals that you need to do-it-yourself, call Sears PartsDirectSM! 1-800-366-PART 6am- 11p.m. csm. (1-800-366-7278) 7 days a week www.sears.conVpartsdirect To purchase or inquire about a Sears Service Agreement: 1-800-827-6655 7 a.m.- 5 p.m. CST, Mon. - Sat. Para pedir servicio de reparaci6n a domJciflo, y para ordenar piezas con entrega a domicilio: 1-888-SU-HOGAR s. (1-888-784-6427) Au Canada pour service en franqais: 1-877-LE-FOYER _ (1-877-533-6937) SEARS ] HomeCentral ® © Sears, Roebuck and Co. 177291 12.14.00 TR ® RegisteredTrademark / TMTrademark of Sears, Roebuck and Co. ® Mama Registrada / TMMarca de F&brica de Sears, Roebuck and Co, Printed in U.S.A.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 32 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Tue Aug 14 10:42:35 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools