RULES FOR SAFE OPERATION (Continued)
NEVER USE IN AN EXPLOSNE ATMO-
SPHERE. Normal sparking of the motorcould
igniteflammable liquids,gases, or fumes,
KEEP HANDLES DRY, CLEAN, AND FREE
FROM OIL AND GREASE. Always use a clean
clothwhen cleaning. Never use brake fluids,
gasoline,petroleum-based productsor any
strongsotventsto clean your tool.
STAY ALERT, Watch what you are doing and
use common sense. Do notoperate toolwhen
you are tired. Do notrush.
CHECK DAMAGED PARTS. Beforefurther use
of the tool,a guardor other part that isdamaged
shouldbe carefullychecked to determinethat it
willoperate properlyand performits intended
function. Check for alignment of movingparts,
bindingof movingparts, breakage of parts,
mounting,and any other conditionsthat may
affect its operation. A guard or other partthat is
damaged should be properlyrepaired or
replacedby an authorized servicecenter unless
indicatedelsewhere in this instructionmanual.
I DO NOT USE TOOL IF _NI'I'CH DOES NOT
TURN IT ON AND OFF. Have defective switches
replaced by an authorized servicecenter.
DRUGS, ALCOHOL, MEDICATION, Do not
operate tool while underthe influenceof drugs,
alcohol,or any medication.
DRILLING OR DRIVING SCREWS INTO
ELECTRICAL WIRING IN WALLS, CEILINGS,
OR OTHER AREAS CAN CAUSE THE BIT OR
CHUCK TO BECOME ELECTRICALLY LIVE.
Do not touch metal partswhen drillingintoa wall;
grasp onlythe insulated handle(s) or plastic
housingwhen usingthistool. Make sure hidden
electricalwiring,water pipes, and mechanical
hazards are notin the path of the bitwhen
drillinginto a wall,
•INSPECT FOR and removeall nails from lumber
IMPORTANT SAFETY RULES FOR BATTERY
Batterytools do not have to be pluggedinto an
electricaloutlet;therefore, they are always in
operatingcondition.Be aware of possible
hazardswhen not usingyour batterytool or
USE ONLY THE CHARGER PROVIDED WITH
YOUR BATTERY TOOL. Do notsubstituteany
other charger. Use of anothercharger could
cause batteries to explode causing possible
DO NOT PLACE BATTERY TOOLS OR THEIR
BA'I-FERIES NEAR FIRE OR HEAT. They may
DO NOT CHARGE BATrERY TOOL IN A
DAMP OR WET LOCATION.
Your batterytool shouldbe charged in a location
where the temperature is morethan 50°F bLt
less than 100°F.
Under extreme usage or temperature conditions,
batten/leakage may occur, If liquidcomes in
contact withyour skin,wash immediatelywith
soapand water, then neutralizewith lemonjuice
orvinegar. If liquidgets inyour eyes, flush them
with clean water for at least 1Ominutes,then
seek immediate medical attention.
If canying your batterytool at your side, make
sure it is not runningand your finger is noton the
SECURE WORK before applyingpower. NEVER
holdworkplace inyour hand or acrossyour legs.
WHEN SERVICING USE ONLY IDENTICAL
CRAFTSMAN REPLACEMENT PARTS,
IMPORTANT SAFETY INSTRUCTIONS FOR
•SAVE THESE INSTRUCTIONS. This manual
instructionsfor batter/charger part number
Before usingbatterycharger, read all instructions
and cautionarymarkingsinthis manual, on
battery charger, and product usingbattery
A WARNING: To reduce dskof injury,charge only
nickel-cadmiumtype rechargeable bettedes.
Other typas of batteries may burstcausing
personal Injuryand damage.
Do notexpose chergerto rain or snow.
Use of an attachment notrecommended or sold
by the batterycharger manufacturer may result
in a riskof fire, electric shock,or injuryto
To reduce dsk of damage to charger body and
cord, pull by charger body rather than cord when
Make sure cord is located so that it will notbe
stepped on, tripped over, or otherwisesubjected
to damage or stress,